Not included are the small battens used as cleats. Those would cost more to ship than to buy locally: they are simple 3/4" square battens available in any home improvement store.
The kit is cut on a computer controlled router system (CNC numeric machining) for extremely accurate and precise panel creation. All parts are cut from BS 1088 Okoume plywood to the designer's specifications. Each panel is cut leaving tabs between the piece and the waste plywood. This allows for safer shipping leaving small tabs for the customer to cut out, much like taking apart the pieces of models when we were kids.
More Supplies, Refills and Custom Kits: Our kits contain enough resin and fiberglass to completely finish your boat. The quantities are based not only on our BOM calculations but also on years of experience and feedback from our builders. In many cases, we supply too much resin because it is more economical to buy a large quantity. We also include a 15% waste and you should not run out of resin, However, first time builders may need more resin. Some may want to fiberglass more than what we specify or double the layers. In those cases, more resin may be needed. We sell extra resin and hardener separately at our online store BoatBuilderCentral.com. At BoatBuilderCentral.com you will also find accessories, tools, paint and everything that you may need to customize your kit.
To receive a quote for shipping outside the lower 48 states, please e-mail us at email@example.com. We will respond with a shipping quote.